Upgrade IOS

First things first on these 3750's was to upgrade the IOS to advanced IP services. That didn't take long, and here are the commands to do it.

Switch1#show flash:

Directory of flash:/

  410  drwx         192   Mar 4 1993 21:44:16 +00:00  c3560-ipbase-mz.122-25.SEE3

32514048 bytes total (24361984 bytes free)

Switch1#copy tftp: flash:

Address or name of remote host [10.192.240.5]?

Source filename [advipserv.bin]?

Destination filename [advipserv.bin]?

Accessing tftp://10.192.240.5/advipserv.bin...

Loading advipserv.bin from 10.192.240.5 (via Vlan1): 

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 6398853 bytes]

6398853 bytes copied in 145.349 secs (44024 bytes/sec)

Switch1#show boot

BOOT path-list      : flash:c3560-ipbase-mz.122-25.SEE3/c3560-ipbase-mz.122-25.SEE3.bin

Config file         : flash:/config.text

Private Config file : flash:/private-config.text

Enable Break        : no

Manual Boot         : no

HELPER path-list    :

Auto upgrade        : yes

Switch1#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Switch1(config)#boot system flash:advipserv.bin

Switch1(config)#exit

00:40:13: %SYS-5-CONFIG_I: Configured from console by consoleeload

Switch1#reload

System configuration has been modified. Save? [yes/no]: yes

Building configuration...

[OK]

Proceed with reload? [confirm]

All done. My show ver looks like this now:

Switch   Ports  Model              SW Version              SW Image

------   -----  -----              ----------              ----------

*    1   28     WS-C3560G-24PS     12.2(25)SEB4            C3560-IPSERVICES-M

Configuration register is 0xF